吲哚方酸菁半导体在场效应晶体管中的应用

研究了2,3,3-三甲基-1-H-吲哚方酸菁的场效应性质, 通过X射线衍射证实了方酸菁分子内电荷分离结构以及分子间面面堆积模式, 并在Si/SiO₂基片上通过真空蒸镀和旋涂的方法制备了p型晶体管器件. 通过对器件性能与沟道形态的研究, 我们发现退火处理能促进方酸菁薄膜由无定形态向多晶态转变, 从而使薄膜晶体管的迁移率从10^-5 cm²?V^-1?s^-1量级提高到10^-3 cm²?V^-1?s^-1量级. 顶接触结构单晶器件获得了7.8×10^-2 cm²?V^-1?s^-1的迁移率. 未封装的方酸菁晶体管在大气中也表现出较好的稳定性.     

Hydrothermal synthesis of cubic boron nitride microcrystals

In this paper, combining the hydrothermal method and halide species-inducing effect, we reported cubic-phase BN microcrystals synthesized in hydrothermal condition with N(CH₃)₃ as nitrogen source. These polyhedral microcrystals presented nearly regular octahedral shapes of 0.5?C1.5 ??m in average size.     

An example of quality control of fine chemical intermediates: related impurity analysis of industrial phthalic anhydride by reversed-phase high-performance liquid chromatography

A reliable reversed-phase high-performance liquid chromatographic method has been developed for analysis of related impurities in industrial phthalic anhydride (PA). Maleic acid (hydrolysis product of maleic anhydride), phthalimide, and benzoic acid were separated from phthalic acid (Pa, hydrolysis product of PA) on a C₁₈ column by gradient elution with acetonitrile and 0.1% (v/v) aqueous perchloric acid solution. This method is simple, sensitive, and accurate, and has been successfully applied to quality control of PA for industrial use.     

离子迁移谱法检测圣女果中的敌敌畏和马拉硫磷

建立了采用便携式离子迁移谱仪(IMS)对敌敌畏和马拉硫磷进行快速检测的分析方法.在大气压条件下,以63Ni作为电离源,干燥洁净的空气作为载气和迁移气,采用负离子模式进行操作,气路采用闭路循环模式.在优化条件下(进样口温度为180 ℃,迁移管温度为150 ℃,载气流量和迁移气流量均为0.6L/min)进行检测,敌敌畏和马...     

溶胶-凝胶法可控制备氧化锡纳米晶包覆碳纳米管

采用溶胶-凝胶法制备了氧化锡纳米晶包覆的碳纳米管。自由Sn4+离子从稳定的Sn柠檬酸配合物中缓慢释放出来,迁移到碳纳米管上,并在碳纳米管上沉积形成了SnO2纳米晶,沉积过程完全为异相成核方式,在碳纳米管外并没有发现单独的SnO2纳米晶。这种溶胶-凝胶方法还可以用来制备无氯离子污染的、低团聚的纯SnO2纳米晶。     

Synthesis, crystal structure and optical properties of the new lead fluoride borate—Pb2BO3F

A new compound, Pb₂BO₃F, has been grown by high temperature solution method from the PbO–PbF₂–B₂O₃ system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6₃/m (No. 176) with unit-cell parameters a=7.2460(3) Å, c=14.5521(17) Å, Z=6, V=661.69(9) ų. Its structure was solved by the direct methods and refined to R₁=0.0163 and wR₂=0.0367. The structure of Pb₂BO₃F consists of the distorted PbO₃F₂ groups and BO₃ triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb₂BO₃F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb₂BO₃F has been measured. The BO₃ functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb₂BO₃F suggests that Pb₂BO₃F melts congruently at 448 °C.     

The metathetic degradation of polyisoprene and polybutadiene in block copolymers using Grubbs second generation catalyst

A degradation study of polystyrene-polybutadiene-polystyrene and polyisoprene-polystyrene-polyisoprene in both dichloromethane and hexane solvents is presented. Alternative solvents for metathetic degradation provide the potential for greener chemistry, better selectivity, and control over the products. The catalyst concentration and solvent selection both determine the products formed. The degradation of polyisoprene and polybutadiene in a particular solvent was controlled by the solubility of polyisoprene/polybutadiene, and by its solubility relative to polystyrene. A large difference in solubility between the polymers in the selected solvent provides an additional driving force for block separation, encouraging reaction close to the interface between different blocks. Furthermore, solubility of the block copolymer speeds the degradation reaction. This tailoring of the reaction mechanism yields a new control over the products of polymer degradation.     

多孔介质中流动参数的三维显示

本文利用当今三维图形工作站提供的最新视觉化技术，动态显示多孔介质中流动的原理和方法，主要探讨三个问题：（１）改进参数场图像化的质量。力求以逼真的，生活化的三维图形显示参数场的分布；（２）尽可能加快动态显示速度，力求以更强的动感显示出流动过程中参数场的变化规律；（３）尽可能丰富图形编辑功能，提高人机联作交互性。     

Convenient Synthesis of 2,7-Diamino-9,9- bis(4-aminophenyl)fluorene

For the synthesis of 2,7-diamino-9,9-bis(4-aminophenyl)fluorene 2 , first 2,7-dinitro-9,9-bis(4-aminophenyl)fluorene 1 was synthesized by the reaction of 2,7-dinitro-9-fluorenone with aniline and aniline hydrochloride. 2 was obtained by the reduction of 1 with hydrazine hydrate and 10% palladium on carbon.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.